New High-Speed Automatic Plastic Powder Mixer

• Customization: Available
• After-sales Service: Lifetime After-Sales
• Automatic Grade: Semi-Automatic
• Model NO.: XH-422
• Structure: Horizontal
• Warranty: 1 Year
• Power: 3HP-4p Stirring Knife Maximum Speed: 1500r/Min, Ad
• Full Volume of Mixing Tank: 10L, Effective Mixing Volume 6L-7L
• Heating Method: Electric Heating and Natural Friction
• Top Lift Control Mode: Manual
• Mixing Time: 8-12 Minutes
• Transport Package: Wrap Film Pearl Wool Wooden Box
• Trademark: XiHua
• Origin: China Guangdong
• Package Size: 130.00cm * 80.00cm * 120.00cm
• Package Gross Weight: 270.000kg

Product Description

Product Description

 

The high-speed mixer is mainly used for the mixing and coloring of polyvinyl chloride resin, the coloring and drying of polyethylene and polypropylene particles, the drying of ABS polycarbonate and other hydroscopic resin before forming and processing, and the mixing of phenolic resin. It is one of the necessary equipment for plastic processing plants, and has a wide range of uses in rubber,dyeing and other industries. Compared with the previous mixer, it has obvious advantages, and now it has gradually replaced the low-speed mixer and is widely used in the production of various plastics industries.

1.Power: 3HP-4P stirring knife maximum speed: 1500r/min, adjustable speed with inverter
2.Full volume of mixing tank: 10L, effective mixing volume 6L-7L
3.Heating method: electric heating and natural friction
4.Top lift control mode: manual
5.Mixing time: 8-12 minutes
6.Transmission mode: belt
7.The inner wall of the barrel is made of 304# stainless steel, the bottom of the barrel is 5mm, the 304# plate is stamped and formed, which is strong and wear-resistant. The outer interlayer of the barrel can pass water or heat transfer oil.
8.Mixing knife all 304# stainless steel, by dynamic and static balance correction treatment
9.Bearings using imported roller automatic aligning type, can withstand large load conditions.
10.The mixing drum is covered with stainless steel and sealed with an encrypted seal
 

Machine Features

The machine adapts a practical horizontal cylinder structure.
The driving shaft is equipped with inflatable seal.  While washing, the air can be replaced by water.
Fluidized granulating processed is used and the final granules are quite round with high fluidity.
Compared with traditional technique, this type of machine can reduce and also shorten the drying time.
Dry mixing, wet mixing and granulating are finished inside the same sealed container, which is in conformity with the requirements of "GMP".
Our highlights:
Easy to operate
Easy to clean
Strong and durable
Compact structure
and other advantages

Product Parameters

 

No	Item	Data	>>Special models can be designed and manufactured according to customer requirements
1	Power	3HP-4P
2	Mixing knife maximum speed	1500r/min, with frequency converter can be adjusted
3	Full volume of mixing tank	10L, effective mixing volume 6L-7L
4	Heating method	electric heating and natural friction
5	Top lift control mode	manual
6	Mixing time	8-12 minutes
7	Transmission mode	belt

8	Discharge method	manual discharge
9	Machine size	L1200*W550*H1350MM
10	Power supply	3∮, AC380V
11	Machine weight	300KG

Detailed Photos

 

Control panel:You can control the heating, rotational speed, temperature and other parameters here

 

Storage bin:All kinds of raw materials are mixed in here.The inner wall of the barrel is made of 304# stainless steel, the bottom of the barrel is 5mm.

 

Feed hole:From here, the material is placed in the storage bin. The mixing drum is covered with stainless steel and sealed with an encrypted seal

Packaging & Shipping

 

We first wrapped the fuselage with a winding film and fixed it initially. Then it is further wrapped with pearl cotton to avoid damage to the machine due to bumps on the road, and finally the wrapped machine is placed in a wooden box for transportation to ensure the safe transportation of the product.

Certifications

 

Why Choose Us

 

Our Company :Guangdon g Xihua Machinery Co., Ltd. is a laboratory equipment high-tech enterprise that integrates research and development, manufacturing, sales, and service.
The company was founded in 1995 and is headquartered in Dongguan, Guangdong. The factory covers a total area of 15000 square meters. It has passed ISO quality management system certification and CE EU'safety certification.
 

 

Our strength:The factory covers a total area of 15000 square meters. It has passed ISO quality management system certification and CE EU'safety certification. We have multiple sets of domestically advanced fully automatic production equipment, independent research and development laboratory, multifunctional exhibition halls, and advanced testing and analysis instruments.
 

 

Our customers:Closely cooperate with many Fortune 500 companies, well-known domestic enterprises and research institutions. The international market covers Russia, Germany, Australia, the United States, Canada, Mexico, Brazil, India, Saudi Arabia, Singapore, Malaysia, South Korea, Thailand, Turkey, the Philippines. Vietnam, etc.
 

 

Our commitment:
>>24-hour service
>>personalized customization
>>20+ years manufacture experience
>>lifetime after-sales service
>>6000+ cooperative customers
>>product quality assurance

 

FAQ

1.I need this product, but what can i do  the specifications shown on the details page are not what I want?
Please rest assured that all the company's product specifications, configurations, etc. can be customized according to customer needs, the product is only the company's standard machine model, you can customize according to demand, but it should be noted that the price will fluctuate.
2.Are you a manufacturer or a trading company?
 We are professional laboratory instrument manufacturers, have their own design team and factory, have mature technical experience, and can guarantee the quality of products and the optimal price.
3.How is your company's product after-sales service system?
The product warranty period is 12 months, we can provide lifetime maintenance.  We have professional pre-sales and after-sales departments that can respond to you within 24 hours to resolve any technical issues.
4. How long is your delivery time?  If I want to customize the instrument, how long does it take?
1.  If the goods are in stock, it is 5-10 days.  2.  We can provide customized services for our customers.  It usually takes 30-60 days depending on the specifications of the custom instrument.
5.How is the package of goods?  Delivery methods?
1.  Standard export fumigation sign wooden box packaging 2.  Express, air, sea shipping according to customer requirements, find the most suitable way.
More questions, please contact customer service.