| After-sales Service: | a Lifetime of Service |
|---|---|
| Warranty: | 1 Years |
| Type: | Impact Testing Machine |
| Customization: |
|---|
|
Shipping Cost:
Estimated freight per unit. |
about shipping cost and estimated delivery time. |
|---|
| Payment Method: |
|
|---|---|
| Initial Payment Full Payment |
| Currency: | US$ |
|---|
| Return&refunds: | You can apply for a refund up to 30 days after receipt of the products. |
|---|
Suppliers with verified business licenses
Audited Supplier The cantilever beam impact tester is used to measure the impact toughness of non-metallic materials such as plastic, reinforced nylon, fiberglass, ceramics, cast stone, plastic electrical appliances, and insulating materials. It is a common equipment for quality inspection by scientific research institution, universities and non-metallic materials manufacturers. It has the feature of simple structure, easy operation and high test accuracy.
Standards:Comply with ISO179-92, GB1043-93, JB/T 8762-1998, JB/T8761-1998 standards
| Model | XH-5D-CM | ||
| Izod pendulum energy | 1J,2.7J,5.5J | ||
| Charpy pendulum energy | 1J,2J,4J,5J | ||
| Charpy impact speed | 2.9m/s | ||
| Charpy pendulum center distance | 230mm | ||
| Izod impact speed | 3.5m/s | ||
| Izod pendulum center distance | 335mm | ||
| Pendulum angle | 150° | ||
| Measurement accuracy | ±0.1% | ||
| Resolution | 0.03% | ||
| The distance from the izod impact blade to the upper plane of the jaw | 22mm±0.5mm | ||
| Izod edge fillet radius | R=0.8mm | ||
| Charpy impact edge fillet radius | R=2mm±0.5mm | ||
| Charpy impact blade angle | 30°±1° | ||
| Charpy impact edge fillet radius | R=1mm±0.1mm | ||
| Charpy impact support rear angle | 10° | ||
| Output mode | Printout or U-disk output | ||
| Supply voltage | 110~230VAC 50/60Hz | ||
1. The electronic impact testing machine adopts the circular grating angle measuring technology.
2. It has the characteristics of high precision, good stability and large measuring range. 3.Digital Displaying the value of impact strength, pre-elevation angle, rising angle, and average value.
4.It has the function of automatic correction of energy loss, printing test report, etc.
5.The new material carbon brazing is used to make the swing arm, which is stronger than steel and lighter than aluminum.
We first wrapped the fuselage with a winding film and fixed it initially. Then it is further wrapped with pearl cotton to avoid damage to the machine due to bumps on the road, and finally the wrapped machine is placed in a wooden box for transportation to ensure the safe transportation of the product.
| Packaging | |
| Size | 850*400*750mm |
| Weight | About 80kg |
| Packaging Details | Wooden box |
https://dgxihua.en.made-in-china.com/company-Dongguan-Xihua-Machinery-Technology-Co-Ltd-.html
Suppliers with verified business licenses
Audited Supplier 
){kind=link}
){kind=link}