Product Description
XH-406BE-30 hot pressing machine hot pressing machine/press machine/ good quality control toolis applicable to R & D in laboratory.
Put the raw materials into the mold between the electric boards and set up certain pressure and temperature.The raw materials are formed into test specimen for test use.
The machine features compact size, cmplete functions, stable temperature, low noise, easy opention and material saving.
small hydraulic press machine is major in rubber and plastic machine, you can call it hot press molding machine, if you use the machine use for rubber you may call it vulcanizing press machine, because you know that the rubber material need to add sulfrizing and if you use for plastic, call it as hot press machine.
| XH-406BE-30 Technical Parameter |
| Capacity selection |
30 ton or customize |
| Temperature control |
normal temperature~300ºC |
| Precision of the control temp |
+ -2ºC |
| Heating Mode |
Electrical Heating |
| Timepiece |
LED 0~99(min) |
| Area of electric board |
300*300mm designated |
| Area of cooling plate |
300*300mm designated |
| Cooling mode |
Compressor water cooling or running water cooling |
| Plate spacing |
0~70mm designated |
| Volume |
1100*650*1600mm |
| Weight |
About 750kg |
| Power supply |
3Ø, AC380V, 20A |
Small Hydraulic Press Machine Features
(1) XH-406BE-30 tablet press machine is applicable to R & D in laboratory because of its compact size, complete functions, stable temperature, low noise, easy operation and material saving.
(2) High-precision temperature sensor, together LED temperature controller, built-in dense-point heating wire and tubular condenser, has the temperature range from normal temperature to 300ºC.
(3) Imported KDB electric board features high-temperature resistance, abrasion resistance, fast thermal transmission and strenghthen against deformation.
(4) Single heating can be designed according to the requirements.
(5) Oil hydraulic system: the pressure range: 30 ton, the maximum stroke of the cylinder: 180mm.
Testing sample
Details images
The test material is placed between two plates, the heating chamber is Here is the control panel, where you can set the temperature,
time and pressure to suit the material
between the top two plates, and the cooling chamber is between
the bottom two plates
Logistics packaging
First, wrap the fuselage with a winding film to initially ensure the stability of the fuselage;Then wrap a circle again with pearl cotton, which has a certain thickness and is soft, and can prevent damage to the machine due to bumps during transportation;Finally, the machine is placed in a wooden box tailored to its size to ensure the safety and stability of the machine during transport.
){kind=link}