XNR400AM melt flow rate meter is based on GB36822000, Test Methods for Determination of ISO1133 thermoplastic flow properties at high temperature instrument, which uses a microcomputer (MCU) control, Chinese user interface, automatic test results; for polyethylene (PE), polypropylene (PP), polyoxymethylene (POM), polystyrene (PS), ABS plastic, polycarbonate melt flow rate measurement (PC), etc. at a high temperature can be measured MFR value (quality Act)
Technical Data:
* Measuring range: 0.1-400.00g/10min(MFR) * Precision of temperature control: Room temperature - 400°c * Precision of temperature: ± 2°c
* Precision of timepiece: 1s
* Load: Full load
* Cutting mode: Manual, by time
* Temperature recovery time: less than 4 minutes * Cut material number: 1-99* Cut material time interval : 10-600 seconds
* Holding time: Ten thousand hours of continuous work
* Cavity die: Tungsten carbide, L 8.000mm±0.025mm, internal diameter Φ2.095mm ±0.005mm
* Screw barrel internal diameter: Φ9.550mm ± 0.025mm
* Screw barrel length: 152± 0.1mm
* Cavity die: Tungsten carbide, L 8.000mm±0.025mm, internal diameter 2.095mm ±0.005mm
* Power: 0.45KW
* Power supply: AC220V±10%,50Hz
* Dimension: 400mm * 500mm * 600mm
* Weight: 60kg
Audited Supplier 
){kind=link}